Model | WL-603HN |
| Display method | 7-inch human-machine interface |
| Function | cable cutting, outer jacket and inner conductor stripping, core wire twisting |
| Wire type | Single-core wire, multi-core cable, sheathed wire, wire, PVC, etc. |
| Processing range | 0.75 - 30 mm2 (including sheathed wire below 10 cores) |
| Cut off length | 1mm-999999.99mm |
| Minimum total peeling length | Total length--Front end peeling length--Rear end peeling length>120mm |
| Cutting tolerance | Within 0.002*L (L=cutting length) |
| Internal and external peeling length | Front stripping: 10-200mm of outer sheath is completely removed, 1-50mm of inner core wire is removed |
| After stripping: completely remove the outer sheath 10-80mm, inner core wire 1-50mm |
| Twisting stroke | 120mm |
| The maximum diameter allowed to pass | Φ18 |
| Tool material | High quality imported high speed steel |
| Productivity (times/hour) | 3500 PCS/hour, (sheathed wire 900pcs/H) depends on the length and size of the wire |
| Drive mode | 16-wheel drive (feeding stepper motor, tool holder servo motor); Roptional servo feeding |
| Wire delivery method | Belt feeding, no embossing or scratches on the cable. (With peeling and pressing function) |
| Lifting operation mode | Digitally adjustable pressure wheel height |
| power supply | AC220V 50/60Hz; Roptional 110V 50/60Hz |
| Gas source | 0.5Mpa clean air source |
| Dimensions (length*width*height) | 68*48*55m |
| net weight | 100kg |
